חיישן כוח לחיצה
Features
-
Detection and Measurement of Force/Pressure
-
Made of flexible substrates
-
Sensing Human Touch
-
Input for: Gaming, Medical Applications, Navigation Controls, Measuring Grip
-
Simple Construction
-
Low Profile
Mechanical Specifications
Actuations Cycles: >1 million
Actuation Force: 0.1 Newtons
Force Range: 0.1N to 10N
Thickness: <0.020in [0.51mm] Z-axis Travel: 0.006in
Electrical Specifications
Resistance Range: 10Mohms to 1Kohms
Resolution: continuous
Repeatability: ±10%
Non-Actuated Resistance: >10MOhms
Electrical Response: (see chart below)
Environmental Specifications
Operating Temperature: -30°C to + 70°C
IP Rating of Active Area: IP60 (Stock), IP65 (Custom Option)
The Standard FST of 5mm diameter actuation area (FST-R-0005-ST) is the smallest FST available, for special applications needing small actuation areas.
The Standard FST of 12.7mm diameter actuation area (FST-R-0013-ST) is a popular size, as it fits the dimension of a finger for force applications.
The Standard FST of 38mm Square actuation area is a good fit for larger hand actuated areas. Custom sizes range up to 500mm square. PN: FST-S-0038-ST.
Custom sizes may range up to 500mm square.
How It Works
In simple terms, the Force Sensor Touch is a layered electrical membrane based on a specialty resistive ink on one layer that varies in resistance value as it is being pushed. The more force, the greater the conductivity of the ink, registering a resistance curve that shows the amount of force given to the sensor. On another later, is the signal processing that transmits the change in resistance to the electronics
By pressing down with an actuator or a finger, requiring no electrical properties of the actuation device, the Force Sensor Touch will give the desired electrical output. The top and bottom circuits are separated by 0.15mm (0.006″) spacer adhesive build-up and contact between the circuit occurs by pressure from the non-conductive mechanism.
