Electrosurgical Footswitch (6226-0087)

MD2G-CGA-BA0-ZZC-001

• 2 pedal medical grade footswitch for electro surgical applications

• Left pedal Yellow labelled ‘CUT’, normally open contacts

• Right pedal Blue labelled ‘COAG’

• Normally open contacts

• Complete with 3 meters of cable with free wire ends, exit on the left side

• Steel divider bar in centre and steel handle to rear

• Sealed to IPX7

• Electrical rating: 1.75A 24V DC

• Complies with UL/IEC 60601-1

MD2G-CGA-BA0-ZZC-001 Electrosurgical Footswitch – Technical Overview and Medical Applications

The MD2G-CGA-BA0-ZZC-001 is a high-quality medical-grade dual-pedal footswitch designed for use in electrosurgical applications. Manufactured by Herga Technology, this device is essential for precise, hands-free control during surgical procedures, ensuring both efficiency and sterility. The footswitch is widely used in operating rooms to control electrosurgical generators, providing surgeons with seamless operation of cutting (CUT) and coagulation (COAG) functions.

Technical Specifications

• Design: Two-pedal electrosurgical footswitch
• Left Pedal: Yellow, labeled ‘CUT’ – Normally open contacts
• Right Pedal: Blue, labeled ‘COAG’ – Normally open contacts
• Cable: 3 meters with free wire ends, exiting from the left side
• Build Features:
  • Steel divider bar in the center for tactile separation
  • Steel handle at the rear for easy portability
• Sealing: IPX7 waterproof rating, ensuring protection against immersion in water
• Electrical Rating: 1.75A at 24V DC
• Compliance: UL/IEC 60601-1, meeting international medical safety standards

Medical Applications – CUT and COAG Functions

Electrosurgery is a widely used technique in modern medicine, utilizing high-frequency electrical currents to cut tissue (CUT) or achieve hemostasis by coagulating blood vessels (COAG). The MD2G-CGA-BA0-ZZC-001 footswitch allows precise and immediate activation of these functions:

1. CUT (Yellow Pedal):
   • Used to incise soft tissues with minimal thermal damage
   • Provides clean, precise cuts essential for delicate surgical procedures
   • Commonly applied in general surgery, dermatology, and gynecology
2. COAG (Blue Pedal):
   • Used to control bleeding by coagulating small blood vessels
   • Reduces the risk of excessive bleeding and improves surgical visibility
   • Frequently utilized in orthopedic, cardiovascular, and laparoscopic procedures

By integrating the MD2G-CGA-BA0-ZZC-001 into surgical workflows, medical teams can enhance efficiency, safety, and precision in various electrosurgical applications.

Installation Instructions

Proper installation and handling are crucial for ensuring the reliability of the footswitch in surgical settings:

1. Unpacking & Inspection
   • Remove the footswitch from its packaging.
   • Inspect for any visible damage or defects before use.
2. Connection
   • Attach the 3-meter cable to the electrosurgical generator.
   • Ensure the connections are secure to prevent accidental disconnections during surgery.
3. Testing & Calibration
   • Test both pedals to confirm correct functionality.
   • Verify that CUT (Yellow) and COAG (Blue) correspond to the intended generator functions.
4. Maintenance & Cleaning
   • Regularly inspect for wear and damage.
   • Clean using manufacturer-approved disinfectants, ensuring IPX7 compliance is maintained.

Availability in Israel – Amironic

For hospitals and medical facilities in Israel, the MD2G-CGA-BA0-ZZC-001 Electrosurgical Footswitch is available through Amironic, the authorized distributor of Herga Technology products. Amironic provides technical support, installation guidance, and reliable supply to ensure seamless integration into surgical environments.

For more information, including technical consultations and purchasing options, contact Amironic or visit the official Herga Technology website.