Euro XPK Puck Programmable Sensor – Precision Meets Flexibility

Overview

The Euro XPK Puck Sensor, developed by Variohm Eurosensor, is a rugged, non-contact rotary position sensor designed for demanding environments where reliability and flexibility are key. With a programmable angle range from 30° to 360°, redundant output, and IP68 sealing, the Euro XPK Puck provides accurate position feedback in a compact two-piece configuration — consisting of a sensor puck and a separate magnet.

This product is a logical extension of the well-proven Euro-XP platform, now redesigned for improved integration in applications requiring a separate magnet and enhanced environmental durability.

💡 In Israel, the Euro XPK Puck is available exclusively through Amironic – the official local representative for Variohm Eurosensor solutions, including Hall effect angle sensors and non-contact rotary encoders.

---

Key Features

• Fully Programmable Range: 30° to 360°, factory-programmed to your specification.

• Non-Contact Hall Effect Technology: No wear, no friction, longer life (>100 million cycles).

• Redundant Output: Two independent, oppositely-directed channels (CW & CCW).

• Compact Design: 28 mm housing ideal for confined spaces.

• Environmental Resilience:

  • Sealed to IP68 for total dust ingress and prolonged immersion.

  • Wide operating temperature: –40°C to +125°C (short-term to +150°C).

  • High resistance to vibration: 20–2000 Hz, 31.4 g (IEC 60068-2-6).

• Robust Housing: High-grade temperature-resistant plastic for long-term stability.

• Fast Response: 5 kHz sample rate and 600 μs system delay (Fast Mode).

• Signal Output Options:

  • Analog: Ratiometric (5–95% or 10–90%)

  • Digital: PWM (100–1000 Hz, 1000 Hz default)

Ideal for OEM integration, motion control systems, and mechatronic automation.

---

Technical Specifications

Optimized for position sensing in servo systems, robotics, industrial automation, and advanced feedback control loops.

---

Available Magnet Options

Max radial offset for all types: ±1 mm

---

Typical Applications

The Euro XPK Puck sensor is ideal for applications demanding reliable position feedback in harsh, repetitive-use environments:

Industrial Automation

• Robotic joint positioning

• Valve and actuator feedback

• Motor shaft angle detection

• Custom programmable angular sensing

Off-Highway Vehicles

• Steering angle sensors

• Hydraulic boom articulation

• Pedal or joystick position feedback

Renewable Energy

• Solar tracking systems

• Wind turbine yaw control

• Green energy motion sensing

Marine & Aerospace

• Rudder or trim tab feedback

• Control surface angle detection

• Avionics-compatible sensor designs

---

Installation Guidelines

1. Mounting the Puck:

   • Ensure a flat, secure mounting surface.

   • Use appropriate fasteners with a tightening torque not exceeding 2 Nm.

   • Avoid excessive mechanical stress on the housing.

2. Aligning the Magnet:

   • Select the appropriate magnet for the distance and application.

   • Maintain the specified axial gap and radial tolerance (±1 mm max).

   • Align the North pole of the magnet toward the puck face.

3. Electrical Connection:

   • Use the Raychem Spec 55 cable provided.

   • Connect each channel per the wiring diagram:

     • Channel 1 (CW): Red (5V), White (Signal), Black (GND)

     • Channel 2 (CCW): Green (5V), Yellow (Signal), Blue (GND)

4. Programming the Angle:

   • Specify your desired range (30°–360° in 10° increments) when ordering.

   • Custom programming is performed in-house to guarantee precision.

---

Ordering Information

Each sensor is defined by a unique part number specifying mechanical design, signal characteristics, supply voltage, angle, output mode, cable type, and magnet:

Example:
Euro-XPK-2838-812-214-911-02
This denotes:

• 28 mm puck, separate magnet design

• 120° programmed angle

• Crossed outputs (Channel 1 CW)

• Raychem 500 mm cable

• M10 screw magnet included

Contact Amironic for configuration support or large volume orders in Israel.

---

Why Choose the Euro XPK Puck Sensor?

When off-the-shelf angular sensors fall short in precision or flexibility, Euro XPK delivers. Whether you’re optimizing a robotic arm’s articulation or tracking critical shaft rotation under extreme conditions, this sensor offers customizable performance, uncompromising durability, and ease of integration.

Better Output. Better Fit. Less Waste.
Say goodbye to fixed angle sensors that don’t match your system. Get exactly what you need with Euro XPK.

✅ Now available in Israel from Amironic – your source for industrial sensors, motion feedback systems, and embedded control components.