flagעברית
flagEnglish
3 Rabinovich St., Petah-Tikva, Israel
+972 3 9047744
office@amironic.co.il
LinkedIn
YouTube
Product was added to your cart

Cart

waze

Author: amironicLTD

Home Articles Posted by amironicLTD (Page 5)

Gears & Couplings: An Engineering Guide to Precision Motion Transfer

Precision motion is not defined by the gear alone – it is defined by the system.
Many accuracy, vibration, and reliability problems in motion systems do not originate from the gear itself, but from the interaction between the gear, the coupling, and the mechanical structure in between. This engineering guide presents a system-level approach to selecting gears and couplings, helping designers move beyond catalog data and build motion solutions that remain accurate, stable, and reliable in real-world operation.

AP Series (MIL-PRF-39019) - M39019/06-309

Why M39019 Is Not Just a Standard – It’s an Identity

M39019 is not just another MIL standard.
It is a military standard part number that defines identity – mechanical interface, behavior, and repeatability – not just test compliance. A component specified as M39019 becomes part of the system architecture, enabling interchangeability, sustainment, and long-term reliability far beyond initial qualification.

Gyro and IMU for Advanced Control Systems

Gyros and IMUs are often selected based on static datasheet parameters such as Noise Density, ARW, and Bias Stability. In real-world control systems, this approach is frequently insufficient. Systems that appear stable during laboratory testing may exhibit jitter, drift, or instability under dynamic, cyclic operating conditions. This article explains why thresholds, recovery behavior, and deterministic timing – rather than averages – are the factors that truly define stability in advanced control loops, and why IMU selection must be treated as a system-level decision.

When a Glass Feedthrough Becomes a System Design Challenge

A compact sensor project required multiple pressure-tight electrical feedthroughs under strict space, leakage and soldering constraints.
By combining standard single-pin glass feedthroughs with a carefully engineered assembly approach, a low-risk and scalable solution was achieved without custom multi-pin development.

A Sensor Rated for 2000 bar – But Is It Designed to Work There?

A pressure sensor rated for 2000 bar is not necessarily designed to operate there continuously. In high-pressure systems, the critical distinction is between rated pressure and operating pressure. This article explains why long-term operation near full scale leads to drift and reliability issues, and how proper high-pressure sensor selection prevents costly design mistakes.

DC/DC Converter for MIL-STD-1275F: What a 24V→12V Power Supply That Truly Survives “Electrical Hell” Looks Like

MIL-STD-1275F does not simply test whether a power supply survives extreme voltage events, but whether it continues to operate reliably after repeated electrical stress. This article examines what a truly field-ready 24V→12V DC/DC converter looks like, based on real behavioral requirements such as surge and spike immunity, automatic recovery, EMI control, thermal design, and system-level integration.