Modern military systems require more than overcurrent protection. Learn how circuit breakers equipped with Shunt Trip and Auxiliary Contacts become active components of the control system, enabling remote power isolation, reliable status feedback, and improved functional safety.
Is measuring pressure alone enough? Discover why more engineers are combining pressure and temperature measurements to gain a more complete understanding of system behavior, improve diagnostics, and increase long-term reliability.
Engineers typically compare IMUs based on performance, accuracy, bandwidth, and price. However, one critical factor is often overlooked: ease of integration. A sensor that’s just a few millimeters larger can trigger PCB redesigns, mechanical changes, additional prototypes, and costly project delays. Discover why a compact IMU can reduce integration risk, shorten development cycles, and lower the total cost of ownership- often saving far more than the difference in component price.
Why do modern machines with advanced PLCs still use a Hour Meter? Learn how Hour Meters improve preventive maintenance, why they complement rather than replace PLCs, and how to choose the right model for 400VAC, 50Hz, and 60Hz industrial applications.
Why do foot switches fail? Learn the most common causes of failure, how to select the right foot switch for your application, and why cable design, environmental protection and operating conditions matter just as much as electrical specifications.
Most engineers begin designing a worm gear transmission by selecting the required gear ratio. However, two worm gear sets with the same gear ratio can behave very differently depending on the number of worm starts. This article explains how the number of starts influences efficiency, lead angle, friction, back driving, self-locking, and overall transmission performance, helping engineers choose the right Worm & Wheel configuration for their application.
The SX3 architecture represents a new generation of MEMS inertial sensing, combining ultra-low noise, high stability, 600 Hz bandwidth, 10 kHz output rates and sub-20 µs latency in a compact platform. Designed for advanced stabilization, tracking, autonomy and navigation-assisted applications, SX3 demonstrates how modern MEMS technology is evolving beyond traditional motion control toward systems where measurement quality itself becomes a critical factor in overall mission performance.
Reliable circuit protection is a critical part of data center power infrastructure. Learn how Airpax hydraulic-magnetic breakers help protect power distribution, battery systems, and control circuits.
Choosing the right switching technology involves much more than voltage, current and IP ratings. From electrical and pneumatic switches to Bluetooth, USB, infrared and pressure-based solutions, each technology is designed for different environments, safety requirements and user interactions. This guide explains the advantages, limitations and ideal applications of six common switching technologies, helping engineers select the most effective solution for long-term reliability, usability and performance.
The temperature sensor showed 80°C. The reading was completely accurate. The motor still burned out. Why? Because in thermal protection, the most important question is not how hot it is—but where you are measuring. Discover how VARIOHM temperature sensors and LIMITOR thermal protection devices help engineers improve reliability, prevent overheating, and protect critical systems.
